Delivery of 3D printing system by selective laser sintering of powders (SLS)

1. The subject of the contract is the delivery of the 3D printing system by selective laser sintering of powders (SLS) in the quantity of 1 (one) set to the place (the Recipient) indicated in §4(1) of Annex No 4 to the SWZ – Designed provisions of the contract. 2. In accordance with the provisions of §1 of Annex 4 to the WWZ – The proposed provisions of the contract include: 1) Delivery of the subject matter of the contract, which includes a set of instruments necessary for the operation meeting the technical, quality and usability requirements set out in Annex 3 to the SWZ – Description of the object of the order and Annex No 4 to the SWZ – Designed provisions of the contract; 2) conducting at the premises of the Recipient the launching of the device including installation, calibration and printouts/verification tests confirming: correctness of the selective sintering process on PA12 material; operation of an automatic powder recovery station (function of mixing, screening, temperature reading); full cycle of the drum sander with smoothing module; maintenance of declared parameters of thickness of the layer and laser power; 3) conducting as part of remuneration (contract value) training of operators of the product for a minimum of 2 working days, each 8 hours, completed with the issue of the manufacturer's name certificates. The place of the training shall be the address of the delivery. 3. In this procedure, the Contracting Authority does not provide for the option to be exercised.